Faxback NET SatisFAXtion 9.0 - Fax Server Manual Bedienungsanleitung PDF herunterladen (Seite 170)

%8!s!

shortmonthnamestring

%9!s!

longmonthnamestring

%10!u!

year%100(2digityear)

%11!u!

hour(for12houram/pmformat)

%12!s!

am/pmstringfor12hourformat



Be very careful what you specify in the string as as it is passed directly through and if you                  

specify a string type for a parameter that is an int you will most likely cause a UAE. For                  

instance, if you put in %2 or %2!s!, then the passed page number parameter will be used as a                  

pointer to a string by FormatMessage. A page number of 1 would be a bad string address and                 

would cause a UAE. Default: From:%1!20.20s! Page#:%2!u! Date:%3!u!/%4!u!/%5!u!       

%6!u!:%7!2.2u!.



send_burst_topmost[dword0–65535]:Default:10.



send_burst_highwater[dword0–65535]:Default:8.



send_burst_delay_msecs [dword 0–65535]: When submitting a lot of messages at once,          

this has been shown to make a small improvement without FILEBASE, and a significant             

improvementwithFILEBASE.Default:500.



send_retry_seconds [dword 0–65535]: The amount of time in seconds to elapse before           

attempting to resend a message after any retryable reason other than the remote unit being              

busy.Default:15.



strip_header_line_count [string]: How many scan lines to strip from the top of each page of              

areceivefax.Thisisaperdevicesetting.



tsid [string(20)]: This sets a default CSID to use when transmitting if the SFAX_CONTROLS             

structure has NULL for its local_csid field. If this setting is not present, the csid setting in the fax                  

driverregistrysectionforthisdevicewillapply.



max_pages[dword0–65535]:Default:0.



min_disk_free_kbytes [dword 0–65535]: ICANFax checks disk space every minute. When         

free space falls below the specified threshold, ICANFax sets the global comm state to disable              

receives and applies the diskfull_receiving setting for each port. Sends are unaffected. When            

disk space rises above the threshold, everything returns to normal. This is not implemented in              

theWin32ICANFax.Default:1000.



mode [string]: Sets whether this device sends, receives, both, or neither. This setting must be              

present. When the application specifies "*" for "first available" device when sending a message,             

devices set to FAX_OUT only have higher priority than devices set to FAX_IN, FAX_OUT. This is               

to prevent devices that are set to both send and receive from sending a message, thus being                

unavailable for receives, when a device set to only send is available. This is a device specific                

setting, but you can set the default for all devices by specifying this under the global ICANFax                

section. Format: Comma separated list of FAX_IN and FAX_OUT, or disabled. Default: FAX_IN,            

FAX_OUT.



order [string]: This is used to control the ordering of devices so that particular devices will be                

used for "send any" events before others. This will also be the order that they are shown from                 

applications like the monitor or Administration. It does not need to contain all of the fax devices                

– only those that you want sorted at to head of the linked list of devices. Format: Comma                 

separatedlistofportnames.



rtp_percent [dword 0–100]: This is the percentage of bad scan lines to good scan lines that               

will cause ICANFax to respond with an RTP to the fax driver. This only applies when doing                

nonECM fax receive and the driver is configured for a post page holdup. If post receive convert                

is enabled or the debug pages are enabled, ICANFax will always respond to the driver holdup               

withanMCFastheconversionisnotdoneinrealtime.Settingto0disablesRTP.Default:5.



rtn_percent [dword 0–100]: This is the percentage of bad scan lines to good scan lines that               

ProprietaryFaxBack,Inc.2014 170

1 2 ... 165 166 167 168 169 170 171 172 173 174 175 ... 202 203

Kommentare zu diesen Handbüchern

Keine Kommentare

Faxback NET SatisFAXtion 9.0 - Fax Server Manual Bedienungsanleitung Seite 170

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Software Faxback NET SatisFAXtion 9.0 - Fax Server Manual